Hi guys, need some assistance please with a script to add ACL entries in bulk to Cisco switches.
conf t
No access-list 11
access-list 11 permit 10.81.3.194
access-list 11 permit 10.117.14.1
access-list 11 permit 10.81.129.29
access-list 11 permit 10.81.224.81
access-list 11 permit 10.25.64.0 0.0.31.255
access-list 11 permit 10.116.0.0 0.0.3.255
access-list 11 permit 10.116.80.0 0.0.1.255
access-list 11 permit 172.30.0.0 0.0.31.255
access-list 11 deny any log
No access-list 12
access-list 12 permit 10.81.3.194
access-list 12 permit 10.117.14.1
access-list 12 permit 10.81.129.29
access-list 12 permit 10.81.224.81
access-list 12 permit 10.194.24.0 0.0.0.255
access-list 12 permit 10.25.64.0 0.0.31.255
access-list 12 permit 10.116.0.0 0.0.3.255
access-list 12 permit 10.116.80.0 0.0.1.255
access-list 12 permit 172.30.0.0 0.0.31.255
access-list 12 deny any log
end
wr
Script fails on validation
Validation Failed: An error occurred during script parsing. Position: Line 1, Character 1 Error message: mismatched input 'conf' expecting SCRIPT keyword Please check script syntax.