Cisco SNMP trap for Realtime Change Detection
I am working on getting RTCD working. I have my cisco devices configured to send SNMP traps:snmp-server enable traps configHowever, a trap is sent when a user enters config mode, not if they actually...
View ArticleTFTP SERVER VER 10 PROBLEM
I use tftp server for 3 years now with no problems until yesterday I got new ver 10 and start gives me message says : GET Interrupted by client, received error packet with code: 0 and message session...
View ArticleNCM changes less than desirable
I want the old NCM back please!!! Not sure how thoroughly this was tested but its completely useless to me now. The integration of NPM with NCM is less than desirable. The ability to be able to...
View Articleadd existing node to NCM
I may be missing something here, but as a node manager how can I add an existing node to NCM? when you click edit properties, there are numerous tick boxes but not one to add node to NCM? now i know...
View ArticleNCM Script to Change DHCP Scope on Cisco Routers
Hi all, Has any one got a Script that will run on NCM to change the DCHP scope based on the IP of VLAN 1 etc. I have a script based on access list but not DHCP. script BaseChangeTemplate(NCM.Nodes...
View ArticleCisco SNMP trap for Realtime Change Detection
I am working on getting RTCD working. I have my cisco devices configured to send SNMP traps:snmp-server enable traps configHowever, a trap is sent when a user enters config mode, not if they actually...
View ArticleUpgrade IOS using NCM?
Hello We have over 500 switches which need an IOS upgrade and doing this one by one is going to take an age. Is there any way we could use NCM to automate the upgrade? Cheers
View ArticleRegarding error "ERROR: Cannot download Running config : Connection Refused by"
Hi all, Hope you are doing good. I Kaustubh Chavan using Solarwinds ( version for 7.0.2) for auto backup of network devices on daily basis but getting below error for few of the devices & else...
View ArticleClik here to view.
Adding nodes into NCM
Before upgrading to NPM 11.0.1,if I selected Add or Manage Nodes in the NCM Node Management settings. it would bring up a display where I could sort on what was in NCM and what was not. But now when I...
View ArticleNCM Configuration management Error
NCM configuration management with more than 1 level genertes following error message Die Socketverbindung wurde abgebrochen. Dies kann durch einen Fehler beim Verarbeiten der Nachricht, durch ein...
View ArticleError: Connectivity issues, discarding configuration (or configuration is too...
So to preface this I have already read both of these threads: Connectivity issues, discarding configuration (or configuration is too short) NCM 7.1Connectivity issues, discarding configuration (or...
View ArticleCisco SNMP trap for Realtime Change Detection
I am working on getting RTCD working. I have my cisco devices configured to send SNMP traps:snmp-server enable traps configHowever, a trap is sent when a user enters config mode, not if they actually...
View ArticleNCM 6.1 and NETOPIA Routers
I work on a closed network so I'm not able to upload any data to the THWACK community, I can only post information that I see.We use two older, NETOPIA R3100-U,-UP,-I ISDN Routers. (Company use to be...
View ArticleDoes the solarwinds scp/sftp server support key sharing? Trying to backup...
I am trying to run an automated script from NCM on a checkpoint firewall that will download its back up .tgz file and send it up to my server via SCP. It seems to me that the Solarwinds SCP/SFTP server...
View ArticleIssue with downloading Cisco IOS Configs
I've got about 8 switches out of 253 which are not downloading their configs. When I've looked at the issue and tried to do a manual download I get the following error message Input string was not in a...
View ArticleACS is eventually being discontinued - what are people planning on using for...
At my current job we have an older version of Cisco ACS that is going EOL soon. We've started looking into upgrading to the latest Cisco ACS server, which is version 5.5 I hear. Not only is it very...
View ArticleWay to join Bridge and ARP tables?? Need to build "where is this host?" type...
I am trying to write a query that will tell me all the devices on a particular network device as well as a report that will tell me where a host is on the network (Interface and network device its...
View ArticleWindows installer for NCM 7.2.2 fires randomly
Hello, Has anyone experienced the following and if so how did you resolve it? We are running NCM 7.2.2 on a Windows 2008 SP2 VM. Whenever we try to do the following on the server:- export a report from...
View ArticleNCM 7.3.2 Additional Poller Question
We recently upgraded NPM to 11.01 and NCM to 7.3.2 and installed an additional polling engine. I've added a couple of nodes to the second poller as a test. Everything seems to be working great but I do...
View Articleadd existing node to NCM
I may be missing something here, but as a node manager how can I add an existing node to NCM? when you click edit properties, there are numerous tick boxes but not one to add node to NCM? now i know...
View Article