From CONFIGS->Config Management page, We are not able to download vlan...
In NCM, We are trying to download the following configurations from our switch, *running config *startup config *show interface *show vlan *show vlan group *show lag We were...
View ArticleDownload config from Alcatel 7750 & 7450
Does someone able to download the configuration from the Alcatel 7750 & 7450 devices ? Thanks
View ArticleNCM RTN - use IP in syslog message body not source
Hello, We use a syslog aggregator, so all the syslog from our network devices get sent to Solarwinds and appear from a single source IP. This is reflected in the "Hostname" field on the Syslog viewer....
View ArticleConnectivity issues, discarding configuration (or configuration is too short)...
I've captured the configs on about 500 routers, but on about 10 of them, I get the following error in config download every time:Connectivity issues, discarding configuration (or configuration is too...
View ArticleRTCD using SNMP traps not recognizing config changes
I am using real time change detection with SNMP traps and I am getting all the right looking alerts but even when I make a change to the configuration I still get the message "no change detected,...
View ArticleACS is eventually being discontinued - what are people planning on using for...
At my current job we have an older version of Cisco ACS that is going EOL soon. We've started looking into upgrading to the latest Cisco ACS server, which is version 5.5 I hear. Not only is it very...
View ArticleClik here to view.
Executing a script to reboot DELL PowerConnect switch not working
Greetings, I am trying to use the built-in job to reboot a DELL PowerConnect switch. The job report as follows: SolarWinds Network Configuration Manager Scheduled Job...
View ArticleNode Groups where are they in NCM 7.4?
I am looking to create Groups of switches and push changes to them. I remember in previous version (Cirrus) there was the concept of Node Groups. It appears I can only type in a text for a node group...
View ArticleClik here to view.
NCM Job Engine backup configs issue
Hi all, I was scheduled a job to backup configuration from network cisco devices.I've 724 nodes into the jobs but only seems 524 nodes in email result.Who know are there have maximum device issue or...
View ArticleReal time change detection not working for newly added device
Hi, I recently added a new switch to the network and added it to NCM. I noticed after a change was made that the real-time change detection wasn't working for it. In checking the syslog, an entry from...
View ArticleCompliance Reporting exact matches
Hello, Having no experience in regex or any kind of query commands, how would I make a rule in a compliance report to check for Vlan2 only? When I create the rule for "interface Vlan2" I get the...
View ArticleConnectivity issues, discarding configuration (or configuration is too short)...
I've captured the configs on about 500 routers, but on about 10 of them, I get the following error in config download every time:Connectivity issues, discarding configuration (or configuration is too...
View ArticleHelp with regular expressions and config change reports
I could use some help with creating a regular expression that the config change report ignores during it's comparison. Basically, I have Cirrus comparing the most recent config downloaded with the...
View ArticleNCM is seeing date change as a change Cisco Nexus 5548
Subject says it all. Every day NCM sees a change in date as a change to configuration. Is there a way to not have that happen? See attached.
View ArticleDownload config from Alcatel 7750 & 7450
Does someone able to download the configuration from the Alcatel 7750 & 7450 devices ? Thanks
View ArticleACS is eventually being discontinued - what are people planning on using for...
At my current job we have an older version of Cisco ACS that is going EOL soon. We've started looking into upgrading to the latest Cisco ACS server, which is version 5.5 I hear. Not only is it very...
View ArticleReal time change detection not working for newly added device
Hi, I recently added a new switch to the network and added it to NCM. I noticed after a change was made that the real-time change detection wasn't working for it. In checking the syslog, an entry from...
View ArticleNCM-Startup / Running config conflicts on dell 6248 switches
The startup config is putting a number in front of every line, So every line shows as changed ?Any help would be great, thanks Guy Startup Config Running...
View ArticleBanner MOTD
I am trying to execute a script with a fairly large banner. Everytime it is pushed to the device it ads a line in between each line of text.so it should look like thisTHIS IS A DOD COMPUTER SYSTEM....
View ArticleClik here to view.
Backing up Riverbed Configs
Has anyone tried backing up Riverbed Configs in Cirrus? We have added the device in Cirrus back it cannot validate the SNMP details...Riverbed is configured correctly also.
View Article
