How can I insert "enter" command in script?
I have a new Alteon Server Load balancer that we can't get NCM to backup the config. What happens is after running this<Command Name="DownloadConfigIndirect" Value="/cfg/ptcfg ${StorageAddress}...
View ArticlePossible to schedule NCM change template execution?
I have built a change template, and want it to self-execute later in the evening. Is it possible to schedule execution of changes? If not, consider this is a feature request!! -Dave Horch
View ArticleCisco SNMP trap for Realtime Change Detection
I am working on getting RTCD working. I have my cisco devices configured to send SNMP traps:snmp-server enable traps configHowever, a trap is sent when a user enters config mode, not if they actually...
View ArticleModify Field object properties
I'm trying to modify 'Field' properties in Orion Report Writer. The problem I have is that one of the Fields called 'description' pulls up information from Cisco devices (Cisco command: show version)...
View ArticleNCM Script Enquiry - The use of IF, Greater Than and Equals on the output of...
Hi All I have a particular scenario and hoping NCM can help us out. I'm not certain its NCM as I want to run this script from the Web Interface as a remediation script. I would be happy to run it...
View Articleneed help! asap! Linux Download and Uploading a config file
need help!i need to back up all configuration on my Linux/Centos 5.7 i already created two(2) config file that can download =====1===== this is the direct <Configuration-Management...
View ArticleRTCD for HP Procurve
I'm trying to set up RTCD for HP Procurve routers and switches, and then alert on them as well. Is there a step by step for this? I can't seem to get the syslog triggers to ever work right and I'm...
View ArticleDelay for Config Change Template
Is there a way to set a delay between commands that are sent using a NCM Config Change Template? I am having an issue with NX-OS devices that prompt for "yes"s or file names, etc and it doesnt get the...
View ArticleCisco Wireless Lan Controller 5508 NCM device template
Moved from Seeking Cisco Wireless Lan Controller 5508 NCM template into the right forum.Customer opened a ticket with support. After a number of attempts here is what we came up with that seems to...
View ArticleCisco SNMP trap for Realtime Change Detection
I am working on getting RTCD working. I have my cisco devices configured to send SNMP traps:snmp-server enable traps configHowever, a trap is sent when a user enters config mode, not if they actually...
View ArticleConfig change report. Incorrect results.
Morning all. NCM is backing configs up and running a comparison report between the running and startup. It is outlining 2 lines of an ACL that are not present in the startup config. But upon checking...
View ArticleForgot NCM Password
Hello AllWhen I try to login to NCM, it gives me error message that the user account details are incorrect. May be I forgot the NCM password.How can I reset the NCM password?
View ArticleUse NCM config change template to remove non-standard syslog servers
Hi, I'm trying to write a config change script that will: 1. configure 2x syslog destinations on IOS devices:.e.g. "logging server 1.1.1.1 logging server 2.2.2.2" 2. Remove any other defined...
View ArticleNCM scheduled download job runs continuously
Have not been able to locate a solution to a scheduled job running continuously. I recently updated a scheduled job that downloads all device configurations (running and startup) nightly. The job...
View ArticleLicensed Nodes Report
I am sure that I am overlooking this but is there not a report in report writer (or otherwise) that would give me a list of all my nodes, the nodes that are in NCM and licensed, and the nodes that are...
View ArticleBanner MOTD
I am trying to execute a script with a fairly large banner. Everytime it is pushed to the device it ads a line in between each line of text.so it should look like thisTHIS IS A DOD COMPUTER SYSTEM....
View ArticleForgot NCM Password
Hello AllWhen I try to login to NCM, it gives me error message that the user account details are incorrect. May be I forgot the NCM password.How can I reset the NCM password?
View ArticleNCM Job wizard wont go past 'enter a name for this job'
I got all my nodes added to NCM just fine, setup credentials and global settings and did a manual config download to test, everything looks good. sow I am trying to configure automatic jobs and no...
View ArticleNCM Configuration Download Feature
Dear Team, I added 30 devices in NCM and now trying to download the Running configuration so I can activate the Config change feature so when I am trying to run the Configuration download, the process...
View ArticleRegEx to ignore spacing
Greetings. My supreme ruler has tasked me with creating a compliance report on a few class-maps with NCM. All is well except for the fact that some versions of cisco IOS prefer to space the lines in...
View Article