Need config script to get the interfaces having ip addresses
Script to find all the interfaces having ip address from the node to push particular command on that interface
View ArticleEverything DISA STIGs for your Network
Introduction This page will be the Main Page for all DISA STIG information provided by CourtesyIT. The intent is to follow this page to alert you to new content and discussions about being DISA STIG...
View ArticleCipher protocols supported by NCM SSH
FYI, just hit an issue following the upgrade of the OS on some of our fortigate boxes [due to the backdoor password discovery] where the ssh provided in NCM 7.3.x doesn't have an agreeable set of...
View Articletrouble with password aging of Cisco SG300
Hi, we have a lot of Cisco SG300. All of them are configured with password aging.It means after input of password there is a question "Your password has exceeded the maximum lifetime. Please change the...
View ArticleHow can I upload the results of the script with multiple devices in a single...
When I used a version of NCM 7.3.2, is used for this application "Network Configuration Manager" on the server. After I made the update to version 7.4.1, this user-friendly application is not found.
View Articlecan .bin files be used for different switches?
I'm really new to Cisco switch configurations, so i don't really know if there is a difference. I went and downloaded the newest IOS for quite a few of our switches and i noticed some of them look...
View ArticleNode change report
Hello I am looking to create a custom report for a 30 days period, the report needs to show me just all the nodes names and the dates of when it was last changed, I do not care about what was changed...
View ArticleF5 and NCM backup
Hi All Please help My aim is to back up configs on our GTM/LTM F5. I have pretty much used all the templates I can see on this forum e.e F5 BIG IP-1.3.6.1.4.1.3375.ConfigMgmt-Commands and I get the...
View ArticleFind all NCM managed nodes and if the config is backuped
Hi all,1stI'd like to create a report that shows all nodes in Solarwinds and the field "Managed by NCM" with "Yes" or "No"Which Database field do I need in a report ? 2ndI'd like to have a report with...
View ArticleIdentify Switch Ports in the UP status
Hi Guys I was googling for a script to do this but can't find one. Does anyone have an NCM script to identify the ports on each Cisco switch that are UP? I have to use NCM for this as we do not...
View ArticleACS is eventually being discontinued - what are people planning on using for...
At my current job we have an older version of Cisco ACS that is going EOL soon. We've started looking into upgrading to the latest Cisco ACS server, which is version 5.5 I hear. Not only is it very...
View ArticleCipher protocols supported by NCM SSH
FYI, just hit an issue following the upgrade of the OS on some of our fortigate boxes [due to the backdoor password discovery] where the ssh provided in NCM 7.3.x doesn't have an agreeable set of...
View ArticleEverything DISA STIGs for your Network
Introduction This page will be the Main Page for all DISA STIG information provided by CourtesyIT. The intent is to follow this page to alert you to new content and discussions about being DISA STIG...
View ArticleNetflow with Avaya 5520 and 4850 switches
I was wondering if anybody has setup Avaya 5520s or 4850s to be Netflow enabled? If you know any of the CMD that would be greatly appreciated. Thanks, Ian
View ArticleNCM - Baseline configurations question
I have a text file of baseline configurations for our switches, but the only thing I can see in NCM is a way to baseline a previously backed-up config. Is there a way to baseline our "ideal"...
View ArticleUpgrade IOS using NCM?
Hello We have over 500 switches which need an IOS upgrade and doing this one by one is going to take an age. Is there any way we could use NCM to automate the upgrade? Cheers
View ArticleF5 and NCM backup
Hi All Please help My aim is to back up configs on our GTM/LTM F5. I have pretty much used all the templates I can see on this forum e.e F5 BIG IP-1.3.6.1.4.1.3375.ConfigMgmt-Commands and I get the...
View ArticleDownload configs from Cisco and Juniper switches configured with SSH
We are doing a switch refresh. Our old Cisco and Juniper switches had telnet only enabled. The new switch stacks are only accessible through SSH and now we are unable to download configurations to...
View ArticleNCM 7.4 Communication Problems
Per direction of our IA department we recently updated the self-signed certificate on our SolarWinds Application Server (Windows Server 2008 R2 Enterprise platform) from 1024 bit to 2048 bit. Here are...
View ArticleACS is eventually being discontinued - what are people planning on using for...
At my current job we have an older version of Cisco ACS that is going EOL soon. We've started looking into upgrading to the latest Cisco ACS server, which is version 5.5 I hear. Not only is it very...
View Article